Cooper M3000 Guia do Utilizador descarregar pdf (Página 177)

100

101

Chapter 2 Setting Up XSCF 2-137

5. Confirm the SNMP settings.

Note – When you changed the SNMP settings back to the default, if the Sun Management

Center (Sun MC) is being used, the SNMP agent information for Sun MC is also cleared. To

set the SNMP agent information for Sun MC again, execute the setsunmc(8) command

with the -s option. For details about the command, see the XSCF Reference Manual or the

man page.

Specifying a User Authentication Algorithm, Creating or Changing an

Authentication/Encryption Password, Copy a User, or Delete a User, All

of Which is USM Management Information

■ Command operation

1. Use the showsnmpusm(8) command to display USM management information.

2. Use the setsnmpusm(8) command to set USM management information.

XSCF> showsnmp

XSCF> showsnmpusm

Username Auth Protocol

-------------- ------------------

yyyyy MD5

user2 MD5

<Example 1> Create an authentication algorithm, authentication

password, and encryption password for a new user.

XSCF> setsnmpusm create -a SHA yyyyy

Authentication Password: xxxxxxxx

Encryption Password: xxxxxxxx

<Example 2> Change only an authentication password.

(If no password is entered, entry of a password is requested.)

XSCF> setsnmpusm passwd -c auth -o ***** -n xxxxxxxx yyyyy

<Example 3> Copy an existing user to add a new user.

XSCF> setsnmpusm clone -u yyyyy newuser

<Example 4> Delete a user

XSCF> setsnmpusm delete yyyyy

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 431 432

Comentários a estes Manuais

Sem comentários

Cooper M3000 Guia do Utilizador Página 177

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cooper M3000